{monogrammed boards}

Share with friends! Pin on PinterestShare on FacebookShare on Google+Tweet about this on TwitterShare on LinkedInShare on StumbleUponShare on Yummly



We have been working to finish a large room in our basement for about 7 months now, and hallelujah, it’s almost done. We still have to paint trim, put up baseboards, and finish the ceiling, but of course I have already started decorating. There is one larger wall that I needed to fill up, and my super talented friend gave me a great idea. She used actual wooden frames purchased from a craft store for hers, but I decided to change mine up a little bit, and make them out of MDF. That’s one of the greatest things about crafting…you can take a great idea and make it your own.
I love how it turned out, and it was just the right size for the space. Stay tuned for what will go underneath them…

ITEMS YOU NEED:

-MDF, cut into desired size. Most large hardware/home improvement stores should do this for you. I made mine 18 inches square, because I wanted a large 3 inch border.
-spray paint
-sandpaper
-12×12 piece of scrapbook paper, per board
-double stick tape
-wooden letters
-hot glue gun

DIRECTIONS:

1. Paint boards. Let dry, then sand edges as desired. Wipe dust off, and let dry.


2. Apply double stick tape to wrong side of scrapbook paper, and place directly in the center of your board. You could also easily use Mod Podge for this project–I decided not to for a couple of reasons, but mostly because the tape allows me to remove the paper easily from the board if I ever want to change the paper out. (For some crazy reason I like to change things around occasionally!)



3. Using the hot glue gun, apply hot glue to the back of the letter, then place squarely on the paper. Be VERY sure you have it where you want it before you put it down–you will not be able to remove it. Let dry completely.


OTHER IDEAS:

You can make these any size you would like to, and to fit any space. Who doesn’t love a monogram? Think how adorable they would be over a child’s bed, or even on an easel in a family room or living room. Hmmmm. I might have to do that.

sweetpea

Share with friends! Pin on PinterestShare on FacebookShare on Google+Tweet about this on TwitterShare on LinkedInShare on StumbleUponShare on Yummly

About Simply Kierste Design Co.

Kierste is a blogger who shares her love of all things DIY. She is the mother of six, and focuses on simple ideas and projects to make a house a home! When she's not chasing around two sets of twins, a teenager, and a baby, she's working on a project, training for her next race, reading one of her favorite books, or baking something with chocolate in it.

8 thoughts on “{monogrammed boards}

  1. This is just the inspiration I needed today – I've been planning a monogram project and now I know what I want to do. Thanks!!

    –Jess @ floralshowers.com

  2. I had to google MDF (sorry, I'm a dork ; ) I love this and have the perfect wall in my basement for it. If I ever try it, I'll let you know how it turns out.

    Thanks.

  3. Jewels—I used the brackets that you put on the back of pictures, the extra large ones to hold the weight.

  4. This is a wonderful idea! I think I would prefer the MDF because it creates more of a 3-D effect in my opinion.

    If you do not mind, I would like to mention this post in my Posts of the Week post due out November 8th! :)

    -Jennifer

Comments are closed.