These super cute DIY Farmhouse Shelves are perfect in our laundry room, and they are a quick afternoon project!
There are affiliate links included below. If you click on a link and make a purchase, I will receive a small commission that helps support this blog, at no extra cost to you.
When we were building the laundry room at Old Salt Farm, I decided not to put top cabinetry in. I didn’t really need a ton of extra storage in there, and I was afraid that it would box in the room too much. I was also hoping to make the space look larger. Once we moved in, I was happy that we left out the top cabinets, but I knew I needed to fill out the large empty wall space. I decided on these darling Farmhouse Shelves, and I adore them. They’re perfect in this space!
Best of all, they’re an easy afternoon project, thanks to the industrial pipes. That’s totally my thing—easy projects that make a huge difference, and that’s definitely the case here. I decided to stain the shelves, but I almost painted them white. You can do stain or paint–whatever works best in your space.
The hardest part of this whole project was lining up the shelves to fit in the space, and having the measurements work with the location of the studs. You have to screw the hardware into studs, and usually they’re about 16 inches part. Always, always check first! We used a stud finder to locate the studs, and even though it wasn’t exactly where I would have put the shelves, we had to go with it.
I decided to use 12 inch boards, but you can use a different width board–whatever you prefer.
Here’s how we put it all together…
DIY FARMHOUSE SHELVES
Per shelf–(these measurements are based on the shelves we made, you can alter based on need)
- ***(2) 3/4 in. x 12 in. black pipe
- (2) black pipe flanges to fit 12 in. pipe
- (2) 3/4 in. black pipe end caps
- 1 x 12 in. pine board
- stain or paint
- hardware for pipe
- stud finder
- 2 in. black drywall screws
***The pipe above is linked to galvanized pipe instead of black, because I couldn’t find the exact ones online to show you. We bought it all at Home Depot, but I know you can get it at Lowe’s too.
1. Measure your space (the measure again!), check for studs (the screws have to go in to the studs!), and figure out where your shelves will go. Mark with a pencil.
2. Use a drill and drywall screws to screw in the flanges to the wall.
3. Screw in the pipe to the flange.
4. Add the end cap.
5. Repeat for each pipe.
6. Cut your board(s) to length. Stain or paint, then let dry completely.
7. Set on top of pipes.
That’s it! Easy, peasy!
On the shelves I keep jars of laundry soap, fabric softener, and clothespins, and they’re used daily. I love having them in close proximity, but up and out of the way of little hands. I also added a few decor items, and it really adds a lot of charm to this room. I’m so happy with them!
For other farmhouse style projects, check out my Farmhouse Style page! You might also like…